Hello, dear guys! The topic we are going to talk about today is so interesting - where is the rotation setting of your LED large screen hidden? Do you often see those cool screens that can rotate in the mall, but you can't even find the operating interface? Don’t worry, today I will take you to break this layer of window paper!

1. Three major hiding places for rotation function

​​1. The mechanism in the hardware structure​​
Let’s first touch the “muscles” of the display. If you want to turn the screen, it is not as simple as just pressing a button. The rotating structure is usually hidden on the back of the display screen, and the core components include a three-piece set of motor, reducer and drive shaft. The key point is:​ ​Motor control box​​It is often the "brain" of rotation function, where key parameters for controlling speed and angle are hidden. For example, the motor speed of a three-sided rotating screen is set to 5 revolutions per minute, which can not only ensure smooth picture without making the audience dizzy.

​​2. The secret in software settings​​
Now take out your control terminal (both mobile phone or computer) and find the "Show direction" option in the system settings. Here is a tip:​ ​First confirm whether the device supports physical rotation​​, adjust the software parameters to avoid errors. For example, there is a "automatically adapted to rotation angle" switch in a certain control software. After turning on, the screen can automatically adjust the screen direction according to the angle of the bracket.

​​3. Doorways during installation and debugging​​
The installation master’s small notebook contains important parameters:​ ​The rotation radius error must be controlled within ±2mm​​, otherwise the picture will be like drunk when you turn it around. Remember to use a level to calibrate during debugging. There is a case where the screen stutters every time it turns to a specific angle due to a 0.5-degree tilt.

2. Selection of rotation schemes for different scenarios

​​The ad screen should be stable​​
What do you fear most when rotating advertising screens in the mall? The picture shakes! Choose now​ ​Servo motor + gearbox​​The combination is like installing a shock absorber to the rotation function. The speed of a certain brand’s advertising screen is set at 3-5 rotations per minute, which not only attracts attention but does not make customers dazzling.

​​Stage screens have to play tricks​​
When you encounter a stage screen that requires 360 degrees of skills, remember to turn on the control software​ ​Trajectory programming function​​. The most amazing case I have ever seen is that the screen of a concert can rotate at a speed to the rhythm of the music, which depends on the preset 20 sets of dynamic parameters.

​​Pay attention to safety in the indoor screen​​
Use rotating screens at home or office, focus on them​ ​Emergency stop button​​and​​Anti-clip hand design​​. Some products have an infrared sensing area around the rotating mechanism, and the obstacle is automatically shut down within 0.3 seconds when it is detected, and the sense of security is directly full.

3. Teach you step by step to set up four steps

​​Step 1: Hardware preparation​​

1. Check whether the shaft is lubricated in place (last month some customers did not apply lubricant, causing abnormal noise)
2. Confirm the power matching of the power supply (rotating motor power = screen weight × speed coefficient)
3. Install limit switches to prevent excessive rotation

​​Step 2: Software debugging​​
After opening the control software, focus on these three parameters:

• Rotation angle (recommended to start testing from 90 degrees)
• Motion track (line/curve switching)
• Synchronization rate (screen refresh matches speed)

​​Step 3: Practical Calibration​​
Take a test picture (recommended to use black and white chessboard pattern) and observe four key points:

1. Is the edge of the screen deformed
2. Is there any tear at the corner
3. Is the color consistency meeting the standard
4. Rotational cycle stability

​​Step 4: Daily maintenance​​
Remember this maintenance tip:
"Clear the dust in the month, oiling season, tightening the screws in half a year"
Especially for the motor heat dissipation port, severe dust accumulation will cause a 30% reduction in speed.

Personal experience in combat

After working on the display screen for so many years, I found an interesting phenomenon: many customers regard the rotation function as a decoration, but there are actually a lot of articles in it. For example, a shopping mall placed promotional information on different surfaces of the rotating screen, and the customer flow increased by 18%. Another tip: Setting "random rotation interval" in the control software can make the advertising content more fresh.

Finally, let’s say something heart-to-heart:​​Don't just look at the speed parameters when choosing a device​​, the key is to look at the acceleration stability. The most exaggerated case I have ever seen is that a certain screen takes only 0.5 seconds from stationary to full speed, and the gears are scrapped in one month. Remember, a good rotating screen should be like waltz--elegant and smooth, not a street dance floor action!

for more product information and pricing, please contact us .