Hey, have you also encountered this situation? Standing in a shopping mall, looking at the large LED screen that suddenly went black, I wondered: How on earth do you turn off the power of this thing? Don't panic, today we will break down the issue of shutting down the LED screen in a common way and explain it clearly.

1. The shutdown button may be hidden in places you don’t expect.

​​Core Principle: All LED screens have a three-level power-off system​​
Let me start with a real case - at an international sports event last year, the staff was stunned for half an hour looking for the power-off button. In fact, the current LED screen design is no longer "one switch dominates the world". There are three main situations:

• ​​wall fixed screen​ ​: Usually there is a red physical button in the lower right corner of the screen (the kind with a fingerprint lock)
• ​​Mobile rental screen​ ​: The power controller is in the groove on the side of the splicing box.
• ​​outdoor advertising screen​ ​: Use the included remote control to press and hold for 5 seconds to shut down.

Here is a little bit of trivia - when a high-end LED screen is turned off, there will be a "breathing light" prompt, that is, the power button will flash like a pulse for 30 seconds, and it will not be truly turned off until it is completely extinguished.

2. Correct shutdown posture in different scenarios

​​Key points to remember: soft first, then hard, and power off step by step​​
At an international sports event we served last month, their technical director shared a motto: "Shutting down the power is like stewing soup, and the fire will suffer." The specific operation is divided into four steps:

1. ​​About the content source​ ​: First unplug the signal cable from the computer or player.
2. ​​Turn off screen display​ ​: Click "Soft Shutdown" in the control system (just like a mobile phone lock screen)
3. ​​Cut off main power​ ​: Find the circuit breaker marked "LED screen main power" in the distribution box
4. ​​Closing inspection​ ​: Wait for all cooling fans to stop before leaving.

There is an easy pitfall: when the outdoor screen encounters a thunderstorm, never press the power button directly! The correct approach is to turn off the main gate first, and then unplug the lightning protection module.

3. Don’t try these death-defying operations.

​​Bloody lesson: Violent power outage destroys equipment​​
I've personally seen newbies do stupid things - just pull the plug and burn the control card. Let me give you some key points:

• × Directly pull the switch when playing a video (like slamming on the engine and damaging the engine)
• × Use an ordinary water-based fire extinguisher to spray live equipment (may cause secondary short circuit)
• × Operating the outdoor screen power supply with bare hands on a rainy day (be careful of becoming a "human lightning rod")

A special reminder for screens with smart brightness adjustment to adjust the brightness to the lowest setting before shutting down. This is like asking athletes to do relaxation exercises. Stopping high-intensity exercise suddenly can cause cramps, right?

4. What should you do if you encounter a crash? Three tools for emergency response

​​Life-saving trick: 90% of problems can be solved manually​​
Last week, a customer called in a panic and said that the screen was stuck on the startup screen and would not move. In fact, it is very simple to deal with:

1. Find the emergency power-off hole (usually a small round hole, poke it with the tip of a pen for 5 seconds)
2. Disconnect all signal lines and wait 30 seconds
3. When powering back on, press and hold the "+" key to enter recovery mode.

By the way, a reminder: many high-end screens now have "safe shutdown" designs. For example, on some commercial advertising screens, even if there is a sudden power outage, the built-in supercapacitor can support the completion of the safe shutdown process, automatically protecting core data like an airplane black box.

Personal opinion: Shutting down is a matter of skill

After working in the LED display industry for more than ten years, I discovered an interesting phenomenon: those who can turn on the computer are not considered skilled, but those who can shut down gracefully are the real experts. Just like opening a restaurant, everyone knows how to light the fire and stir-fry the food. Mastering the timing of turning off the fire is the skill of the chef. Next time you see a large LED screen on the street, you might as well observe its shutdown process - is the screen suddenly black? Or is it like a stage curtain slowly falling? The manufacturer’s technical background may be hidden here.

Speaking of which, I think of the fence screen project we did for a stadium in Japan. When their staff shut down their phones, they had to wait until all pixels were completely extinguished before leaving. This rigorous attitude is worth learning from. After all, if you are gentle with your device, it will last longer with you, right?

for more product information and pricing, please contact us .