​​1. Core parameter decoding: Understand the technical language behind the model​​

​​Pixel spacing (P value)​ ​It is the core indicator of model naming, for example, P2.5 means that the spacing between lamp beads is 2.5mm. This parameter directly affects the display accuracy and viewing distance, and needs to be combined with the installation environment.​ ​Depth of space​ ​and​ ​Mobile line​ ​Comprehensive consideration.

​​Brightness level​ ​As a key indicator, it is recommended to choose an adaptive adjustment model for indoor scenarios of 800-1200cd/m², while for outdoor scenarios, 4000-7500cd/m², high-bright configuration for outdoor scenarios is required to cope with strong light environments. Special scenes such as commercial windows are available​ ​86% permeability​ ​The transparent screen type realizes the integration of virtual and real building facade.

​​2. Four-step method of model traceability: accurate positioning from hardware to data​​

1. ​​Module tag traceability​ ​: Look for a stamped label containing "P value + size + driving parameters" on the back of the display screen. For example, "P4-160×160-2121-32S" means 4mm spacing, 160mm module size, and 2121 lamp bead specifications
2. ​​Control card reverse analysis​ ​: The system compatibility is determined by the receiving card interface type (HUB75-D, etc.) and the grayscale level (14bit and above) to ensure the protocol matching with the video source device
3. ​​Point spacing measurement method​ ​: Use a caliper to measure the center distance of adjacent lamp beads, and quickly match the model with the industry standard spacing table. The error must be controlled within ±0.2mm.
4. ​​Optical parameter verification​ ​: With the help of professional instruments to detect core indicators such as refresh rate (≥1920Hz), color gamut coverage (≥110%NTSC), verify the accuracy of nominal parameters.

​​3. Scenario-based selection matrix: a decision model that matches business needs​​

​​4. Full-cycle management strategy: a closed-loop system from selection to maintenance​​

​​Installation and debugging phase​ ​Need to be checked:

• Power module redundancy (20% power reserved)
• The matching of the heat dissipation system (power consumption control per square ≤500W per square)
• Signal transmission stability (supports 50 meters attenuation-free transmission)

​​Operation and maintenance guarantee system​ ​Should include:

1. 7×24-hour remote diagnosis system
2. Intelligent brightness sensor automatic calibration
3. Three-year warranty commitment for key components

By building​ ​Technical parameters - Scenario requirements - Operation and maintenance capabilities​ ​Three-dimensional selection model can systematically solve the problem of model identification and equipment matching. Especially in the practice of global service, it is recommended to select IP67-level protection models based on local climate characteristics (such as high temperature and high humidity environment in Southeast Asia) to ensure the stable operation of the equipment under complex operating conditions.

for more product information and pricing, please contact us .