Does the LED display you just bought always show the wrong time? Can't find the setup entrance after debugging for a long time? Don't worry, this situation is like the first time a novice driver drives navigation - it looks complicated and actually is very simple. Today we will talk about this problem that has caused many young people to headaches, and ensure that you can do it yourself after reading it.

​​First understand a basic concept: the time of LED display is divided into system clock and display content time​. The system clock controls the running rhythm of the entire device, and the time of displaying content determines when the videos and advertisements you play will be switched. It's like the difference between system time and alarm clock setting in the mobile phone.

I have received a lot of inquiries recently, and a guy who runs a convenience store is particularly anxious. His newly equipped LED poster screen automatically shuts down every 3 a.m., but it clearly has a 24-hour business model. Later I found out that it was​Brightness automatic adjustment function​Clashes with the timing switch—the system performs energy-saving shutdown during low brightness periods by default. This situation can actually be solved in three steps:

1. Press and hold the menu key to bring up the hidden settings
2. Find the "Smart Power Saving" option
3. Change automatic shutdown to continuous operation mode

​​The key point is here! The setup paths for different models may be completely different​​. For example, outdoor advertising screens usually have dual controls of physical buttons + remote control, while transparent LED video walls may need to be connected to computer software. Here is a comparison table for you:

Some readers may ask: "I have followed the instructions, why is the time always inaccurate?" This problem was also encountered in a stadium event last year. Their fence screen was slower by 3 minutes a day, and later it was found that​The power supply voltage is unstable and the clock chip is abnormal​. This situation requires:

• Check the power supply stability (volatility does not exceed ±5%)
• Update firmware version
• Enable the automatic network time synchronization function

Speaking of network alignment, many new models now support the NTP protocol. However, be aware that the firewalls in some places block the time server port. At this time, you can try to use GPS calibration instead or manually enter the benchmark time provided by the National Timer Center.

​​Specially remind novices to pay attention to two pitfalls​​：

1. Never change the daylight saving time adjustment manually, use the automatic switching function
2. Remember to select the right time zone code for cross-time zone projects (for example, Tokyo is UTC+9)
3. The clock module with temperature compensation is 30% more expensive than the ordinary module, but the annual error can be controlled within 10 seconds.

Speaking of this, some friends may be anxious: "How to operate it in detail?" Don't panic. Let's take the most common remote control settings as an example:

1. Press "MENU" to bring up the main menu (some models need to press the confirmation key at the same time)
2. Use the arrow keys to find "Time settings"
3. Select "Manual Proof" or "Auto Sync"
4. After confirmation, press and hold the return key to save

Here is a tip - if you can't find the time setting option, it may be that the system version is too old. Last year, after we upgraded the firmware to a shopping mall in South Korea, the time settings originally hidden in the third-level menu were directly displayed on the main interface.

Many devices now support remote control of mobile APPs. But be aware that there may be a delay of about 200ms when calculating through wireless network. If you need millisecond accurate stage tiles, it is recommended to use wired connection.

Finally, let’s talk about a real case. The LED sign at the front desk of a restaurant chain always displays the wrong business hours during holidays. Checking, it is found that the timeline of the content playlist is not aligned with the system clock. In this case, the playback plan for each time period should be set separately in the content production software, just like setting an alarm clock for different programs.

In fact, whether time setting is difficult or not, the key is to clarify the relationship between device type, control method and application scenario. Just like learning to ride a bicycle, you always feel like you are about to fall at first, and after finding the balance point, you will find it very simple. Next time, if you encounter a situation where the time is inaccurate, don’t rush to report the repairs first. Follow the steps mentioned today to check, maybe you can do it yourself.

for more product information and pricing, please contact us .