Friends who are new to LED screens have probably encountered this situation: after installing a large screen, they can't find the switch, and they wander around the control room anxiously. On the eve of the opening of a shopping mall last year, the engineering team was delayed for two hours in debugging because the switch position was not clear. This kind of low-level mistake should not be made. Today we will clarify the university question in this "little question".

​​1. Three hiding places of power switches​​

1. ​​Concealed compartment in the lower right corner of the control box​​
   90% of the switches for outdoor screens are hidden here, and you have to use the matching key to unscrew the protective cover. Remember to look for the kind with a waterproof rubber ring. Last time I saw a colleague who used an ordinary switch to install it outdoors, it directly short-circuited and smoked during the rainy season.

2. ​​Splicing unit back panel buckle​​
   This design is commonly used for rental screens. There is a thumb-sized toggle switch on the back of each box. The key point is to see whether the buckle is made of aluminum-magnesium alloy. If it is plastic, it will take half a year to determine it - this money cannot be saved.

3. ​​Intelligent central control system virtual keys​​
   Nowadays, high-end screens are popular for mobile phone/tablet control, and physical switches have become a spare tire. But be sure to make sure the system has​ ​Dual power supply redundancy​ ​, don’t be like a music festival where the whole screen will stop working when the router is powered off.

​​2. Switch restricted areas in different scenarios​​
• Don’t put the switch on the back of the stadium fence screen - it will be an accident if an athlete hits it
• The floor tile screen switch must be raised 15cm. Direct water gun fire may cause trouble when cleaning the floor.
• The switch of the transparent screen should not be attached to glass. It may cause poor contact due to thermal expansion and contraction.

There is a real case: a certain exhibition hall installed the switch directly under the screen, but a naughty kid stuffed coins into it and burned the entire control panel. Later, there was an additional rule in the industry - the switch height must be ≥ 1.8 meters.

​​3. Maintenance skills only experienced drivers know​​

1. Wipe switch contacts with insulating grease every month (do not use WD-40)
2. In plateau areas, choose a wide temperature switch (-40℃~85℃)
3. For models with screen self-test function, press and hold the switch for 5 seconds to bring up the diagnostic mode.
4. Double control switches should be regularly tested for active and standby switching (quarterly drills are recommended)

Last year, when a screen was installed at an airport, their maintenance standards stated that the switch life must be ≥50,000 presses. Where did this data come from? In fact, it is a seven-year service life based on switching on and off 20 times a day.

​​4. The pitfalls we have stepped on in those years​​
• I was greedy for cheap and used three-no switches: I ended up replacing four sets in three years, which was more expensive than the original one.
• There is no access door: to replace the switch, you need to dismantle the entire screen, and the labor cost is ten times more expensive than the parts.
• Ignore electromagnetic interference: switches close to transformers must have magnetic shields

Let me tell you an industry secret: a real good switch will make a "click" sound when pressed, while the knock-off switches will make a muffled sound. If you don’t believe me, touch those ten-year-old screens and they will feel just as exciting as when you bought them new.

Do you understand now? Finding a switch is not the goal, the key is to understand what’s behind it​ ​Power management system​ ​. Next time you see a switch with intelligent energy consumption monitoring, don’t be too expensive – it can display the power consumption per square meter in real time and automatically shut down the power when voltage fluctuations occur. This is really saving money. I heard that the latest model can learn electricity usage habits through AI and automatically optimize the timing of switching on and off. Technology changes life!

for more product information and pricing, please contact us .