Hi~welcome to shenzhen xinmu display technology co., ltd.!

News Center

hotline:

13632760729

Where should I look for LED electronic screens in exhibition halls, and how to choose professional customization?

2026-04-11 26

Two days ago, I was helping the art museum choose electronic screens. The person in charge stared at the quotation and scratched his head: "Why are some LED screens of the same size priced at RMB 30,000 and others priced at RMB 150,000?" "This question stopped me - the electronic screens used in exhibition halls are indeed in deep water. Some manufacturers use second-hand modules to refurbish them, and color blocks and faults appear after half a year. The maintenance cost is more expensive than buying a new screen.

​First find out the real needs of the exhibition hall​
When making plans for the Science and Technology Museum last year, we measured and found that the curvature of the curved wall reached R1200. This special shape required the use of flexible screens. Ordinary hard screens will burst if you bend them forcibly. This is really not a scare:

Where should I look for LED electronic screens in exhibition halls, and how to choose professional customization?
  • ​Floor height above 6 meters​ ​The empty area: choose a micro-pitch screen below P2.5 to ensure the clarity of looking up.
  • ​Fully enclosed windowless exhibition hall​ ​: The brightness should not exceed 1200nit, otherwise the eyes of visitors will not be able to bear it.
  • ​Multimedia interactive area​ ​: The refresh rate must be ≥3840Hz so that there will be no scanning lines when shooting with a mobile phone.

There is a typical case: a brand experience center installed ordinary advertising screens. As a result, there was a 0.5 second delay when the audience interacted with AR glasses, which directly led to the collapse of the experience. Later I changed the belt​ ​frame synchronization technology​ ​With the electronic screen, the signal delay dropped to less than 80ms.

━━━━━━━━━━━━━━━━━━━━

​Hidden secrets of purchasing channels​
Nowadays, you can buy them online and offline, but the tricks here are deeper than mobile phone films. Last month, my colleague bought a "screen for exhibition halls" from an e-commerce store. When it arrived, he found that the driver IC was actually an old model from five years ago, and it could play 4K video into a PPT. Here is a comparison for you:

key indicatorsOrdinary channelsProfessional channels
Color reproduction85% NTSC110% DCI-P3
Seam error±1.5mm±0.2mm
signal delay300-500ms≤80ms
Warranty coveragePanel 1 yearFull screen for 3 years

━━━━━━━━━━━━━━━━━━━━

​Three details to look at during factory inspection​
When I visited a display screen factory in an industrial park in Shenzhen last year, I was deeply impressed by their aging test room—new modules have to work continuously for 72 hours at a high temperature of 50°C. Focus on these three places:

  1. ​Lamp bead sorting workshop​ ​The temperature and humidity must be constant. A difference of 2°C will affect the color temperature consistency.
  2. ​Module splicing table​ ​Need to use laser calibration, manual alignment error is too large
  3. ​Quality inspection report​ ​It must include 24-hour grayscale test data. If the fluctuation exceeds 5%, it is a defective product.

I remember the time when the circular screen was accepted at the automobile exhibition hall, the manufacturer demonstrated a "violent test" on-site: using a wrench to slam the joints of the box, the result was that the structure did not move at all. This kind of box made of aviation aluminum + mortise and tenon structure is three times more expensive than an ordinary iron box, but it will not deform after ten years.

━━━━━━━━━━━━━━━━━━━━

​The fatal detail after installation​
What I fear the most is a supplier who loses contact after installing the screen. Reliable manufacturers will provide:

  • ​7×24 hours remote monitoring​ ​: Automatically alarm when the screen goes dark in the middle of the night
  • ​Quarterly door-to-door dust removal​ ​: Use a special negative pressure vacuum cleaner to avoid damaging the lamp beads.
  • ​Alternate Mod Library​ ​: In case of emergency, goods will be dispatched within 2 hours
    A government exhibition hall suffered a loss: the main screen suddenly malfunctioned before the opening ceremony, and it took 18 hours for the manufacturer to dispatch accessories from other places. This incident directly led to the project leader being held accountable.

Do you understand now? Looking for an electronic screen in an exhibition hall is like looking for a surgeon. It depends on actual success stories and emergency response capabilities. Next time you go on an inspection trip, remember to ask someone to play a video of high-speed movement—the one who can clearly see every hair of the cheetah moving is a real talent!

for more product information and pricing, please contact us .

Shenzhen New Screen Display Technology Co.Ltd