​​How to avoid cost traps when purchasing LED light pole screens? ​ ​
Recent data from a smart city project shows that 38% of budget overruns are due to errors in accessory selection. Core cost components include:

• ​​Drive power module​ ​(accounting for 22% of the total cost)
• ​​Cooling system​ ​(accounting for 18%)
• ​​Structural parts​ ​(accounting for 15%)
  Choosing an integrated power management system can reduce subsequent maintenance costs by 30%. Through modular design, a certain engineering project reduced wire consumption by 42% and shortened the installation cycle by 5 working days.

​​How to make a list of materials without getting into trouble? ​ ​
Three types of certification qualifications are required:

1. Optoelectronic performance test report (including 2000 hours of aging data)
2. IP66 waterproof certification (with salt spray test record)
3. Structural mechanics calculation book (wind resistance level ≥10)
   Focus on verification​ ​Lamp bead packaging process​ ​——Equipment using ceramic substrates has a 63% lower failure rate than ordinary products in the humid environment in the south.

​​Is online purchasing really reliable? ​ ​
Compare the risk index of the two procurement channels:

​​How to optimize the installation process to save worry? ​ ​
The acceptance data of the smart street light project shows that projects using prefabricated structures:

• Construction personnel reduced by 40%
• The time spent working at heights is shortened by 55%
• Line failure rate dropped by 78%
  The key is to confirm whether the box has​ ​Quick release structural design​ ​, this improvement can increase the efficiency of later module replacement by more than 3 times.

In a smart park in a coastal city, engineers found that the surface temperature difference of light pole screens using active cooling systems in a 35°C environment was 8.2°C lower than passive cooling products. This difference in details directly affects the 12% failure rate fluctuation of the equipment during the rainy season. When selecting equipment, you may wish to touch the heating area of ​​the prototype with the back of your hand. After 4 hours of continuous operation, the temperature should not exceed 45°C. This is a crude way to judge the quality of the cooling system, but it is more intuitive and reliable than the parameter table.

for more product information and pricing, please contact us .